CAUTION:
Failure to read and follow all warnings below could result in property damage or personal injury. Always use care when working with tools.
PARTS LIST AND DIAGRAM
NOTE: Requires 17mm socket or wrench and hex wrench.
ASSEMBLY INSTRUCTIONS
Step 1) Snap metal tray brackets. Square holes face the floor. This will be important when installing the casters.
Step 2)There are threaded inserts in the bottom of the seat that will align with the holes in the metal frame. Use provided hex bolts to attach. Next, install plastic caps on open tube frame ends.
Step 3) Align the side frames with the metal tray brackets as shown. Casters will install once the holes are aligned. The nut on the caster assembly will fit into the punched square hole on the bottom metal tray bucket. Do not overtighten caster.
MAINTENANCE AND REPAIR
- When servicing, use only identical replacement parts.
- To clean, wipe down with dry or slightly damp cloth. Do not use solvents, as this can damage the upholstery. Be sure to wipe off oil and other fluids when finished using.
USE PRECAUTIONS
This product is not a toy. Do not allow children to play with or near this item, and store out of reach of children.
Use the stool and accessories as intended and in accordance with these instructions, considering the working conditions and the work to be performed. Use of the stool for operations different from those intended could result in a hazardous situation.
Inspect before every use; do not use if parts are loose or damaged.
Do not exceed the weight capacity of 350 lbs in total. NOTE: Be aware of dynamic loading! Sudden shifts in the load may briefly create an excess load, which may result in product failure.
Maintain product labels and nameplates. These carry important safety information.
Store idle equipment. When not in use, this product must be stored in a dry location to inhibit rust.
WARNING!
Do not stand on Seat Pad (A) or Plastic Trays (B).